Stiebel Eltron FTM 200/1.5

Fixing of heating conductor :sewn Self-adhesive :yes Connected voltage :230 V Connected load :300 W Output :200 W/m² Heating conductor load :10 W/m Resistance :173 Ohm Number of PTC thermistors :1 Length of PTC thermistors :4000 mm Suitable for damp rooms :yes Suitable as outdoor heating :no Suitable as roof heating :no Area :1.5 m² Length :5000 mm Width :300 mm Thickness :3 mm With controller :no With room thermostat :no With floor temperature sensor :no Stiebel Eltron floor temperature control FTM 200/1.5: more details The thin-bed heating mats with high heating output are used in new buildings and renovations for floor temperature control, especially in bathrooms. They are installed directly under the floor covering and quickly provide a pleasantly warm floor surface, independent of the existing heating system. The heating mat is suitable as additional or supplementary heating. COMFORT FEATURES: Due to the low installation height, the heating mat can be installed directly in the tile adhesive under ceramic coverings. The smaller installation width is particularly suitable for small, angled floor plans. In combination with a water-guided underfloor heating system, the comfort of a warm floor can thus also be made possible outside the heating season. The heating conductor is completely sewn onto the self-adhesive support mat and can therefore be laid quickly and easily on the floor. INSTALLATION: The mat may be laid in the bathroom in conjunction with a residual current circuit breaker. By cutting the backing fabric to size, the mats can be easily adapted to the individual space conditions. , EAN: 4017212057100.