Stiebel Eltron FTM 100/6

of the heating conductor :sewn Self-adhesive :yes Supply voltage :230 V Connected load :600 W Output :100 W/m² Heating conductor load :10 W/m Resistance :87 Ohm Number of PTC thermistors :1 Length of PTC thermistors :4000 mm Suitable for damp rooms :yes Suitable as outdoor heating :no Suitable as roof heating :no Area :6 m² Length :12000 mm Width :500 mm Thickness :3 mm With controller :no With room thermostat :no With floor temperature sensor :no Stiebel Eltron floor temperature control FTM 100/6: more details The thin-bed heating mats with moderate heating output are suitable for use under soft floor coverings such as carpet, vinyl or cork. COMFORT FEATURES: Installed directly in the grouting or levelling compound under the floor covering, the thin-bed heating mat quickly provides a pleasantly warm floor surface, regardless of the existing heating system. It can be used as an additional or supplementary heating system. Due to the low installation height, it can be used directly in the tile adhesive under ceramic coverings or in a levelling layer for carpets and other soft floor coverings. The installation width is well suited for large rooms with a clear geometry. In combination with a water-guided floor heating system, the comfort of a warm floor can thus also be made possible outside the heating season. The heating conductor is completely sewn onto the self-adhesive support mat and can therefore be laid easily and quickly on the floor. INSTALLATION: The mat may be laid in the bathroom in conjunction with a residual-current device. The mats can be adapted to individual space conditions by cutting the backing fabric. , EAN: 4017212056608.