With Lian-Li's L-Connect 3 software, provided the fans are correctly connected to the controller and the latter is at least connected to the two power connectors and the USB header on the mainboard.
https://lian-li.com/de/L-Connect3/
The item Lian-Li UNI FAN SL-INF 120 ARGB PWM, 3-pack incl. controller (120 mm) is currently marked as sold out. It could be that some of our suppliers will receive further quantities at the end of December. However, this is very uncertain from today's point of view.
The black model of this fan is ARGB, as is the white model. Lian Li's SL-Infinity fans, available in black and white, both feature ARGB technology for a customised viewing experience.
You can screw the fan onto the radiator and then connect the fans to the controller included in the 3-pack. You can then control the fans separately from the AIO via the Lian-Li software or you can connect the controller to the mainboard if you want to control the fans via the mainboard.
The fans that are right next to each other can be daisy-chained. This way you have one cable for the fans at the top, one for the three at the bottom, one for the two at the back and one for the single one at the side. You can connect the cables to the controller supplied (if you buy three packs) and the controller to the MB. It's a really good and clean solution.
I think you are in a "positive pressure" situation in your case.
I suggest you to watch this video on Youtube: https://www.youtube.com/watch?v=Ba6w3QdnWBw&t=2s.
Have a nice week end.
"General questions about your own orders, delivery times or prices should be addressed directly to our customer service." https://www.digitec.ch/de/wiki/5340
Digitec Customer Service - https://helpcenter.digitec.ch/hc/de/requests/new
Somehow these things are no longer available anywhere individually.
I was also upset because I wanted 4 individual ones because they only give the cables with which you can use the fans without a controller! I wanted to connect the fans directly to the mainboard and to a fan controller.
That's why I ordered 4 more last week. They were still in stock.
But my order was cancelled by Digitec because they were no longer available!
Now I'll have to order somewhere abroad!
Once again for understanding:
You want to connect a single UNI FAN SL-INF wireless fan (Art. 59300087) to the analogue controller of the old UNI FAN SL-INF (without wireless, Art. 21233127) - i.e. wire it in the classic way and use it to control speed and RGB, correct?
If that is your plan, the answer is unfortunately: No.
To operate the new SL-INF Wireless, the Wireless Sync Controller (Art. 53791303) is absolutely necessary.
If you want to use both fan types in the same system, you will need two separate controllers:
- the old one (from the SL-INF three-pack) for the wired SL-INF
- the new Wireless Sync Controller for the SL-INF Wireless
Attention: Many mainboards only have 1-2 internal USB headers - you may need an internal USB splitter, e.g. from Lian Li itself (Art. 24915941).
And if you still have a little patience - I will soon be selling off my entire Lian Li mess.
The controller ghetto is absurd: between SL-INF, TL, Wireless, Strimer and co. I sometimes had three controllers in use at the same time. Hardly compatible with each other - and don't even get me started on L-Connect 3. 🤬
Hello!
I want to get these fans to be exact
3x Lian Li Fan SL-INF
3x Lian Li Fan SL-INF wireless
1x Lian Li TL Wireless Reverse Blade
So 7 Lian Li fans and 2 strimmers each for the mainboard and the GPU.
Do I have to explicitly buy a special hub to connect all this?
I also have a Tryx Panorama 360 where I replace the fans with Lian Li fans and place the Tryx fans at the bottom of a Hyte y70. Are my USB ports sufficient for everything (MSI MAG X870E Tomahawh Wifi) or do I have to buy additional ports?
Would be very grateful for an answer
Yes, you probably need the special Lian Li UNI HUB SL-INF for the non-wireless fans and a wireless hub (which is usually included in the 3-pack TL Wireless and SL-INF Wireless) for the wireless fans.
Two strimmer controllers require two USB 2.0 headers.MSI MAG X870E Tomahawk Wifi has two internal USB 2.0 headers → enough for exactly two devices, for four you need a splitter/hub.The fans can be controlled with the mainboard or controller, but the use of the associated hubs is still mandatory for the function of all effects
I currently have 4 Lian Li controllers in the system at the same time.
Therefore you can use more than one, often an internal USB splitter such as [Akasa Internal USB 2.0 Hub Card (30 cm)
Akasa Internal USB 2.0 Hub Card (30 cm)
Shouldn't be a problem with 2 unless you have another internal USB port that you want to use...
However, mine does not recognise the fans and controllers correctly for the update (probably due to the 4 controllers), so I recommend doing this manually.
You can find all the information here:
https://lian-li.com/l-connect3/l3_update_manually/
