The Eisbaer Aurora LT Solo combines CPU cooling block, expansion tank and pump in one product. The low height enables flexible use in a wide range of scenarios. The Eisbaer Aurora LT Solo is particularly impressive in small enclosures with little space. The product is also used as the basis of Alphacool's popular AiO water coolers. Cooler & Pump As with all Alphacool products, the cooler base is made of nickel-plated copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling capacity. The water flow is optimised so that all areas of the cooling floor are cooled evenly. The Eisbaer LT Aurora cooler uses the very compact and small DC-LT 2 pump. It provides enough power to add another component such as a GPU water cooler or another radiator to the circuit. Full Digital aRGB Illumination The cooler pump unit and fans are fully equipped with Digital RGB LEDs, also known as addressable RGB or aRGB. Extensive effects can be set with the included controller or a Digital RGB controller on the mainboard. Of course, the illuminated ice bear on the cooler pump unit provides a nice visual effect. For easier control via a controller, the fans and the pump can be connected in series as a daisy chain. This ensures clean wiring of the individual LED components. Compatibility: Intel: 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM4 / AM5 / TR4 / sTRX4 / sWRX / SP3   Technical data Cooler with pump L x W x H 69 x 69 x 45mm Material of cooler base nickel-plated copper Material of housing acrylic Connectors 2x G1/4???? (+ 1x fill port G1/4???) Pump type DC-LT2 Speed pump 2600 rpm (+/- 10%) Height 0,95m Maximum flow 75 L/h Voltage 12V DC Power consumption 4W Pressure tested 0,8 Bar Maximum working temperature 60??C.